Silicone Press Stud — Specification, Uses and Sourcing Notes
Silicone Press Stud: Specification, Uses and Sourcing Notes
Silicone Press Stud is the version buyers specify when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Silicone gives press stud its durability under wash and abrasion. In practice that means the trim behaves differently in cutting, in finishing and in wear: the finish has to be applied before assembly. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Press Stud |
|---|---|
| Base material | Silicone |
| Standard size | 9 mm Width |
| Common finishes | Soft-Touch Rubber Coating, Matte Black Coating, Glossy Enamel Coating |
| Processes | Die Casting, Stone Washing, Garment Washing |
| Typical applications | Gloves, Boots, Down Jackets, Upholstery |
| Test standard | REACH SVHC Screening |
| Usual packing | 100 pieces per polybag, 10000 per carton |
Properties that matter in buying
- Dimensional stability — 1% allowance is built into the spec before cutting.
- Colour fastness — tested to REACH SVHC Screening on the actual base material, not on a substitute.
- Mechanical performance — pull strength after 50 cycles or washes.
- Compliance — REACH SVHC Screening documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Home Curtains
- Swimwear
- Bridal Gowns
- Socks
- Kidswear
- Workwear
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover shock cord, covered button, shoulder pad, stud trim, and the processes most often paired with press stud include calendering, sublimation printing, singeing.
If you are comparing suppliers, send us the spec they quoted against. We will quote the same spec and show you where the difference sits.
