Silicone Buttonhole Elastic — Specification, Uses and Sourcing Notes
Silicone Buttonhole Elastic: Specification, Uses and Sourcing Notes
Silicone Buttonhole Elastic is the version buyers specify when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Silicone gives buttonhole elastic its drape and hand feel. In practice that means the trim behaves differently in cutting, in finishing and in wear: the finish has to be applied before assembly. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Buttonhole Elastic |
|---|---|
| Base material | Silicone |
| Standard size | 6 mm Width |
| Common finishes | Silicone Wash Finish, Black Nickel Finish, Sandblasted Finish |
| Processes | Sublimation Printing, Metal Stamping, Embroidery |
| Typical applications | Caps, Footwear, Bags, Gloves |
| Test standard | Sedex SMETA |
| Usual packing | 100 pieces per polybag, 2000 per carton |
Properties that matter in buying
- Dimensional stability — 3% allowance is built into the spec before cutting.
- Colour fastness — tested to Sedex SMETA on the actual base material, not on a substitute.
- Mechanical performance — pull strength after 20 cycles or washes.
- Compliance — Sedex SMETA documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Sneakers
- Skirts
- Workwear
- Footwear
- Bedding Sets
- Socks
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover faux leather fabric, eyelash lace, webbing tape, scuba knit fabric, and the processes most often paired with buttonhole elastic include sanforising, warp knitting, weft knitting.
If you are comparing suppliers, send us the spec they quoted against. We will quote the same spec and show you where the difference sits.
