Acrylic Woven Label — Specification, Uses and Sourcing Notes
Acrylic Woven Label: Specification, Uses and Sourcing Notes
Acrylic Woven Label is the version buyers specify when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Acrylic gives woven label its durability under wash and abrasion. In practice that means the trim behaves differently in cutting, in finishing and in wear: shrinkage allowance has to be built into the spec. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Woven Label |
|---|---|
| Base material | Acrylic |
| Standard size | 20 mm Width |
| Common finishes | Brushed Silver Finish, Antique Copper Finish, Soft-Touch Rubber Coating |
| Processes | Mercerising, Yarn Dyeing, Weaving |
| Typical applications | Trousers, Skirts, Kidswear, Caps |
| Test standard | EN 71-3 |
| Usual packing | 200 pieces per polybag, 5000 per carton |
Properties that matter in buying
- Dimensional stability — 3% allowance is built into the spec before cutting.
- Colour fastness — tested to EN 71-3 on the actual base material, not on a substitute.
- Mechanical performance — pull strength after 20 cycles or washes.
- Compliance — EN 71-3 documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Uniforms
- Footwear
- Activewear
- Blouses
- Backpacks
- Evening Wear
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover magnetic snap, aglet, nylon fabric, modal fabric, and the processes most often paired with woven label include mercerising, screen printing, heat setting.
If you are comparing suppliers, send us the spec they quoted against. We will quote the same spec and show you where the difference sits.
