Silicone Shoulder Pad — Specification, Uses and Sourcing Notes
Silicone Shoulder Pad: Specification, Uses and Sourcing Notes
Silicone Shoulder Pad is the version buyers specify when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Silicone gives shoulder pad its strength and surface character. In practice that means the trim behaves differently in cutting, in finishing and in wear: plating and coating adhesion must be tested on the actual base. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Shoulder Pad |
|---|---|
| Base material | Silicone |
| Standard size | 9 mm Width |
| Common finishes | Chrome Plating, Antique Copper Finish, Rainbow Iridescent Finish |
| Processes | Laser Cutting, Digital Printing, Brushing |
| Typical applications | Jeans, Activewear, Upholstery, Caps |
| Test standard | GB 18401 |
| Usual packing | 200 pieces per polybag, 5000 per carton |
Properties that matter in buying
- Dimensional stability — 1% allowance is built into the spec before cutting.
- Colour fastness — tested to GB 18401 on the actual base material, not on a substitute.
- Mechanical performance — elastic recovery after 20 cycles or washes.
- Compliance — GB 18401 documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Evening Wear
- Sneakers
- Trousers
- Upholstery
- Blazers
- Down Jackets
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover lobster clasp, wooden button, rubber patch, bungee cord, and the processes most often paired with shoulder pad include ultrasonic welding, yarn dyeing, epoxy coating.
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
