Glass Boning Tape — Specification, Uses and Sourcing Notes
Glass Boning Tape: Specification, Uses and Sourcing Notes
Glass Boning Tape is the version buyers specify when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Glass gives boning tape its drape and hand feel. In practice that means the trim behaves differently in cutting, in finishing and in wear: shrinkage allowance has to be built into the spec. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Boning Tape |
|---|---|
| Base material | Glass |
| Standard size | 6 mm Width |
| Common finishes | Pearlescent Coating, UV Printing, Chrome Plating |
| Processes | Sublimation Printing, Embossing, Brushing |
| Typical applications | Footwear, Workwear, Kidswear, Yoga Wear |
| Test standard | GB 18401 |
| Usual packing | 100 pieces per polybag, 5000 per carton |
Properties that matter in buying
- Dimensional stability — 2% allowance is built into the spec before cutting.
- Colour fastness — tested to GB 18401 on the actual base material, not on a substitute.
- Mechanical performance — elastic recovery after 30 cycles or washes.
- Compliance — GB 18401 documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Shirts
- Caps
- Skirts
- Sneakers
- Jackets
- Uniforms
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover recycled polyester fabric, georgette fabric, core spun thread, press stud, and the processes most often paired with boning tape include ultrasonic welding, epoxy coating, calendering.
Tell us the item, the quantity and the delivery window. We will quote it with the sub-processes named, so the lead time you approve is the lead time you get.
