Iron Silicone Gripper Tape for Lingerie — Specification, Uses and Sourcing Notes
Iron Silicone Gripper Tape for Lingerie: Specification, Uses and Sourcing Notes
Iron Silicone Gripper Tape is the version buyers specify for lingerie when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Iron gives silicone gripper tape its strength and surface character. In practice that means the trim behaves differently in cutting, in finishing and in wear: plating and coating adhesion must be tested on the actual base. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Silicone Gripper Tape |
|---|---|
| Base material | Iron |
| Standard size | 10# Gauge |
| Common finishes | UV Printing, Anodised Finish, Pearlescent Coating |
| Processes | Singeing, Heat Transfer Printing, Electroplating |
| Typical application | Lingerie |
| Related applications | Workwear, Uniforms, Bridal Gowns, Activewear |
| Test standard | OEKO-TEX Standard 100 |
| Usual packing | 100 pieces per polybag, 2000 per carton |
Properties that matter in buying
- Dimensional stability — 2% allowance is built into the spec before cutting.
- Colour fastness — tested to OEKO-TEX Standard 100 on the actual base material, not on a substitute.
- Mechanical performance — elastic recovery after 50 cycles or washes.
- Compliance — OEKO-TEX Standard 100 documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Caps
- Activewear
- Down Jackets
- Evening Wear
- Skirts
- Workwear
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover satin fabric, woven hang tag, press stud, spandex fabric, and the processes most often paired with silicone gripper tape include anti-pilling finish, piece dyeing, injection moulding.
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
