Welcome to Arts & Crafts-oopcc.com official website!

ABS Resin Jacquard Webbing for Activewear — Specification, Uses and Sourcing Notes

Source:Product Encyclopedia / Time:2026-09-18

ABS Resin Jacquard Webbing for Activewear: Specification, Uses and Sourcing Notes

ABS Resin Jacquard Webbing is the version buyers specify for activewear when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.

What it is

ABS Resin gives jacquard webbing its weight-to-strength ratio. In practice that means the trim behaves differently in cutting, in finishing and in wear: plating and coating adhesion must be tested on the actual base. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.

ABS Resin Jacquard Webbing

Typical specification

ItemJacquard Webbing
Base materialABS Resin
Standard size38 mm Width
Common finishesBlack Nickel Finish, UV Printing, Enzyme Wash Finish
ProcessesMercerising, Anti-Static Finishing, Sublimation Printing
Typical applicationActivewear
Related applicationsBras, Coats, Hats, Blouses
Test standardJIS L Standards
Usual packing500 pieces per polybag, 5000 per carton

Properties that matter in buying

  • Dimensional stability — 1% allowance is built into the spec before cutting.
  • Colour fastness — tested to JIS L Standards on the actual base material, not on a substitute.
  • Mechanical performance — pull strength after 30 cycles or washes.
  • Compliance — JIS L Standards documentation issued with the shipment.
  • Consistency — the approved counter sample becomes the reference for every reorder.

Jacquard Webbing detail

Common uses

  • Bridal Gowns
  • Shirts
  • Evening Wear
  • Kidswear
  • Sportswear
  • Lingerie

How to specify it

  1. Name the base material in the tech pack, not just the item.
  2. Fix the size and tolerance in writing before sampling starts.
  3. Approve a counter sample made from the actual bulk base material.
  4. Order the test report against the standard your market requires.
  5. Retain a golden sample at the factory and a second one with you.

Related reading

Related specifications on this site cover zipper guard, selvedge denim fabric, ramie fabric, closed-end zipper, and the processes most often paired with jacquard webbing include weft knitting, yarn dyeing, embossing.

If you are comparing suppliers, send us the spec they quoted against. We will quote the same spec and show you where the difference sits.

Online customer service
WeChat contact
Customer service
Scan code to add Wechat (same mobile phone number)
Telephone consultation
Back to top