ABS Resin Sequin Trim for Bridal Gowns — Specification, Uses and Sourcing Notes
ABS Resin Sequin Trim for Bridal Gowns: Specification, Uses and Sourcing Notes
ABS Resin Sequin Trim is the version buyers specify for bridal gowns when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
ABS Resin gives sequin trim its weight-to-strength ratio. In practice that means the trim behaves differently in cutting, in finishing and in wear: plating and coating adhesion must be tested on the actual base. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Sequin Trim |
|---|---|
| Base material | ABS Resin |
| Standard size | 20 mm Width |
| Common finishes | Laser Engraved Finish, Gunmetal Finish, Rainbow Iridescent Finish |
| Processes | Flame Retardant Finishing, Screen Printing, Epoxy Coating |
| Typical application | Bridal Gowns |
| Related applications | Bras, Coats, Sportswear, Yoga Wear |
| Test standard | OEKO-TEX Standard 100 |
| Usual packing | 200 pieces per polybag, 2000 per carton |
Properties that matter in buying
- Dimensional stability — 2% allowance is built into the spec before cutting.
- Colour fastness — tested to OEKO-TEX Standard 100 on the actual base material, not on a substitute.
- Mechanical performance — elastic recovery after 20 cycles or washes.
- Compliance — OEKO-TEX Standard 100 documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Activewear
- Evening Wear
- Sleepwear
- Hats
- Down Jackets
- Sportswear
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover bungee cord, bias binding tape, faux leather fabric, softshell fabric, and the processes most often paired with sequin trim include injection moulding, moisture wicking finishing, flame retardant finishing.
If you are comparing suppliers, send us the spec they quoted against. We will quote the same spec and show you where the difference sits.
