PU Leather French Terry Fabric for Jeans — Specification, Uses and Sourcing Notes
PU Leather French Terry Fabric for Jeans: Specification, Uses and Sourcing Notes
PU Leather French Terry Fabric is the version buyers specify for jeans when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
PU Leather gives french terry fabric its strength and surface character. In practice that means the fabric behaves differently in cutting, in finishing and in wear: plating and coating adhesion must be tested on the actual base. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | French Terry Fabric |
|---|---|
| Base material | PU Leather |
| Standard size | 240 gsm |
| Common finishes | Antique Brass Plating, Black Nickel Finish, Anodised Finish |
| Processes | Digital Printing, Garment Washing, Yarn Dyeing |
| Typical application | Jeans |
| Related applications | Suits, Sleepwear, Boots, Sportswear |
| Test standard | ISO 105 Colour Fastness |
| Usual packing | 100 pieces per polybag, 10000 per carton |
Properties that matter in buying
- Dimensional stability — 2% allowance is built into the spec before cutting.
- Colour fastness — tested to ISO 105 Colour Fastness on the actual base material, not on a substitute.
- Mechanical performance — pull strength after 50 cycles or washes.
- Compliance — ISO 105 Colour Fastness documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Blazers
- Scarves
- Boots
- Blouses
- Shirts
- Sportswear
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover jacquard ribbon, iron-on patch, knit interlining, nylon fabric, and the processes most often paired with french terry fabric include embroidery, yarn dyeing, heat setting.
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
