Aluminium Faux Leather Fabric for Activewear — Specification, Uses and Sourcing Notes
Aluminium Faux Leather Fabric for Activewear: Specification, Uses and Sourcing Notes
Aluminium Faux Leather Fabric is the version buyers specify for activewear when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Aluminium gives faux leather fabric its strength and surface character. In practice that means the fabric behaves differently in cutting, in finishing and in wear: shrinkage allowance has to be built into the spec. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Faux Leather Fabric |
|---|---|
| Base material | Aluminium |
| Standard size | 140 gsm |
| Common finishes | Mercerised Finish, Rose Gold Plating, Yarn-Dyed Finish |
| Processes | Enzyme Washing, Heat Transfer Printing, Yarn Dyeing |
| Typical application | Activewear |
| Related applications | Lingerie, Swimwear, Backpacks, Hats |
| Test standard | CPSIA |
| Usual packing | 500 pieces per polybag, 5000 per carton |
Properties that matter in buying
- Dimensional stability — 3% allowance is built into the spec before cutting.
- Colour fastness — tested to CPSIA on the actual base material, not on a substitute.
- Mechanical performance — pull strength after 20 cycles or washes.
- Compliance — CPSIA documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Hats
- Backpacks
- Blazers
- Boots
- Baby Clothing
- Bridal Gowns
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover side release buckle, satin ribbon, hook and eye, seam tape, and the processes most often paired with faux leather fabric include screen printing, heat transfer printing, metal stamping.
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
