Nickel Silver Heat Transfer Label for Dresses — Specification, Uses and Sourcing Notes
Nickel Silver Heat Transfer Label for Dresses: Specification, Uses and Sourcing Notes
Nickel Silver Heat Transfer Label is the version buyers specify for dresses when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Nickel Silver gives heat transfer label its weight-to-strength ratio. In practice that means the trim behaves differently in cutting, in finishing and in wear: plating and coating adhesion must be tested on the actual base. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Heat Transfer Label |
|---|---|
| Base material | Nickel Silver |
| Standard size | 38 mm Width |
| Common finishes | Enzyme Wash Finish, Antique Brass Plating, Anodised Finish |
| Processes | Laser Cutting, Singeing, Water Repellent Finishing |
| Typical application | Dresses |
| Related applications | Jeans, Kidswear, Shirts, Dresses |
| Test standard | ISO 12947 Abrasion Resistance |
| Usual packing | 200 pieces per polybag, 10000 per carton |
Properties that matter in buying
- Dimensional stability — 2% allowance is built into the spec before cutting.
- Colour fastness — tested to ISO 12947 Abrasion Resistance on the actual base material, not on a substitute.
- Mechanical performance — abrasion resistance after 10 cycles or washes.
- Compliance — ISO 12947 Abrasion Resistance documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Boots
- Lingerie
- Blouses
- Down Jackets
- Sneakers
- Home Curtains
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover heat transfer label, metallic thread, microfiber fabric, combed cotton fabric, and the processes most often paired with heat transfer label include water repellent finishing, warp knitting, embroidery.
If you are comparing suppliers, send us the spec they quoted against. We will quote the same spec and show you where the difference sits.
