Ceramic Nylon Bonded Thread for Blazers — Specification, Uses and Sourcing Notes
Ceramic Nylon Bonded Thread for Blazers: Specification, Uses and Sourcing Notes
Ceramic Nylon Bonded Thread is the version buyers specify for blazers when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Ceramic gives nylon bonded thread its durability under wash and abrasion. In practice that means the trim behaves differently in cutting, in finishing and in wear: shrinkage allowance has to be built into the spec. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Nylon Bonded Thread |
|---|---|
| Base material | Ceramic |
| Standard size | 12 mm Width |
| Common finishes | Piece-Dyed Finish, Pearlescent Coating, Black Nickel Finish |
| Processes | Stone Washing, Bonding, Singeing |
| Typical application | Blazers |
| Related applications | Coats, Home Curtains, Caps, Shirts |
| Test standard | RoHS |
| Usual packing | 100 pieces per polybag, 5000 per carton |
Properties that matter in buying
- Dimensional stability — 1% allowance is built into the spec before cutting.
- Colour fastness — tested to RoHS on the actual base material, not on a substitute.
- Mechanical performance — pull strength after 10 cycles or washes.
- Compliance — RoHS documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Sleepwear
- Skirts
- Blazers
- Suits
- Bras
- Lingerie
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover elastic band, embroidered trim, waterproof breathable fabric, power mesh fabric, and the processes most often paired with nylon bonded thread include laser cutting, epoxy coating, embroidery.
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
