Glass Fusible Interlining for Sportswear — Specification, Uses and Sourcing Notes
Glass Fusible Interlining for Sportswear: Specification, Uses and Sourcing Notes
Glass Fusible Interlining is the version buyers specify for sportswear when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Glass gives fusible interlining its strength and surface character. In practice that means the trim behaves differently in cutting, in finishing and in wear: shrinkage allowance has to be built into the spec. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Fusible Interlining |
|---|---|
| Base material | Glass |
| Standard size | 9 mm Width |
| Common finishes | Epoxy Doming, Soft-Touch Rubber Coating, Glossy Enamel Coating |
| Processes | Heat Transfer Printing, Brushing, Weft Knitting |
| Typical application | Sportswear |
| Related applications | Bras, Kidswear, Skirts, Trousers |
| Test standard | Sedex SMETA |
| Usual packing | 100 pieces per polybag, 2000 per carton |
Properties that matter in buying
- Dimensional stability — 1% allowance is built into the spec before cutting.
- Colour fastness — tested to Sedex SMETA on the actual base material, not on a substitute.
- Mechanical performance — cycle life after 10 cycles or washes.
- Compliance — Sedex SMETA documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Activewear
- Kidswear
- Bras
- Gloves
- Caps
- Lingerie
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover pom pom trim, zipper chain, satin label, nylon bonded thread, and the processes most often paired with fusible interlining include electroplating, flame retardant finishing, screen printing.
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
