TPU Silicone Gripper Tape for Coats — Specification, Uses and Sourcing Notes
TPU Silicone Gripper Tape for Coats: Specification, Uses and Sourcing Notes
TPU Silicone Gripper Tape is the version buyers specify for coats when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
TPU gives silicone gripper tape its weight-to-strength ratio. In practice that means the trim behaves differently in cutting, in finishing and in wear: plating and coating adhesion must be tested on the actual base. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Silicone Gripper Tape |
|---|---|
| Base material | TPU |
| Standard size | 38 mm Width |
| Common finishes | Piece-Dyed Finish, Silicone Wash Finish, Gunmetal Finish |
| Processes | Weaving, Piece Dyeing, Sublimation Printing |
| Typical application | Coats |
| Related applications | Coats, Blazers, Underwear, Uniforms |
| Test standard | JIS L Standards |
| Usual packing | 100 pieces per polybag, 5000 per carton |
Properties that matter in buying
- Dimensional stability — 3% allowance is built into the spec before cutting.
- Colour fastness — tested to JIS L Standards on the actual base material, not on a substitute.
- Mechanical performance — elastic recovery after 20 cycles or washes.
- Compliance — JIS L Standards documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Down Jackets
- Blouses
- Gloves
- Luggage
- Baby Clothing
- Skirts
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover eyelet, tpu laminated fabric, webbing tape, swivel hook, and the processes most often paired with silicone gripper tape include heat transfer printing, electroplating, anti-static finishing.
If you are comparing suppliers, send us the spec they quoted against. We will quote the same spec and show you where the difference sits.
