Silicone Iron-On Patch for Evening Wear — Specification, Uses and Sourcing Notes
Silicone Iron-On Patch for Evening Wear: Specification, Uses and Sourcing Notes
Silicone Iron-On Patch is the version buyers specify for evening wear when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Silicone gives iron-on patch its drape and hand feel. In practice that means the trim behaves differently in cutting, in finishing and in wear: plating and coating adhesion must be tested on the actual base. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Iron-On Patch |
|---|---|
| Base material | Silicone |
| Standard size | 20 mm Width |
| Common finishes | Black Nickel Finish, Soft-Touch Rubber Coating, Epoxy Doming |
| Processes | Singeing, Enzyme Washing, Flame Retardant Finishing |
| Typical application | Evening Wear |
| Related applications | Scarves, Underwear, Lingerie, Hats |
| Test standard | GB 18401 |
| Usual packing | 500 pieces per polybag, 5000 per carton |
Properties that matter in buying
- Dimensional stability — 3% allowance is built into the spec before cutting.
- Colour fastness — tested to GB 18401 on the actual base material, not on a substitute.
- Mechanical performance — abrasion resistance after 30 cycles or washes.
- Compliance — GB 18401 documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Uniforms
- Bedding Sets
- Gloves
- Scarves
- Evening Wear
- Home Curtains
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover jacquard webbing, ladder lock, woven label, zipper tape, and the processes most often paired with iron-on patch include epoxy coating, weft knitting, anodising.
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
