Nickel Silver Iron-On Patch for Workwear — Specification, Uses and Sourcing Notes
Nickel Silver Iron-On Patch for Workwear: Specification, Uses and Sourcing Notes
Nickel Silver Iron-On Patch is the version buyers specify for workwear when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Nickel Silver gives iron-on patch its drape and hand feel. In practice that means the trim behaves differently in cutting, in finishing and in wear: the finish has to be applied before assembly. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Iron-On Patch |
|---|---|
| Base material | Nickel Silver |
| Standard size | 12 mm Width |
| Common finishes | Rainbow Iridescent Finish, Black Nickel Finish, Nickel-Free Electroplating |
| Processes | Electroplating, Laser Cutting, Anodising |
| Typical application | Workwear |
| Related applications | Down Jackets, Skirts, Swimwear, Workwear |
| Test standard | GB 18401 |
| Usual packing | 100 pieces per polybag, 10000 per carton |
Properties that matter in buying
- Dimensional stability — 2% allowance is built into the spec before cutting.
- Colour fastness — tested to GB 18401 on the actual base material, not on a substitute.
- Mechanical performance — pull strength after 30 cycles or washes.
- Compliance — GB 18401 documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Suits
- Jeans
- Workwear
- Underwear
- Backpacks
- Footwear
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover organza fabric, waffle knit fabric, ramie fabric, sequin trim, and the processes most often paired with iron-on patch include water repellent finishing, anti-bacterial finishing, ultrasonic welding.
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
