ABS Resin Cord End for Backpacks — Specification, Uses and Sourcing Notes
ABS Resin Cord End for Backpacks: Specification, Uses and Sourcing Notes
ABS Resin Cord End is the version buyers specify for backpacks when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
ABS Resin gives cord end its drape and hand feel. In practice that means the trim behaves differently in cutting, in finishing and in wear: plating and coating adhesion must be tested on the actual base. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Cord End |
|---|---|
| Base material | ABS Resin |
| Standard size | 25 mm Width |
| Common finishes | Epoxy Doming, Enzyme Wash Finish, Chrome Plating |
| Processes | Moisture Wicking Finishing, PU Coating, Weaving |
| Typical application | Backpacks |
| Related applications | Bridal Gowns, Jackets, Trousers, Blazers |
| Test standard | ISO 12947 Abrasion Resistance |
| Usual packing | 500 pieces per polybag, 5000 per carton |
Properties that matter in buying
- Dimensional stability — 2% allowance is built into the spec before cutting.
- Colour fastness — tested to ISO 12947 Abrasion Resistance on the actual base material, not on a substitute.
- Mechanical performance — abrasion resistance after 50 cycles or washes.
- Compliance — ISO 12947 Abrasion Resistance documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Upholstery
- Lingerie
- Workwear
- Jeans
- Blouses
- Activewear
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover piping cord, reflective tape, camouflage print fabric, crepe fabric, and the processes most often paired with cord end include anodising, anti-static finishing, weaving.
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
