Nylon Shank Button for Sneakers — Specification, Uses and Sourcing Notes
Nylon Shank Button for Sneakers: Specification, Uses and Sourcing Notes
Nylon Shank Button is the version buyers specify for sneakers when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Nylon gives shank button its weight-to-strength ratio. In practice that means the trim behaves differently in cutting, in finishing and in wear: shrinkage allowance has to be built into the spec. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Shank Button |
|---|---|
| Base material | Nylon |
| Standard size | 38 mm Width |
| Common finishes | UV Printing, Antique Copper Finish, Brushed Silver Finish |
| Processes | Die Casting, Water Repellent Finishing, Anti-Bacterial Finishing |
| Typical application | Sneakers |
| Related applications | Uniforms, Evening Wear, Swimwear, Boots |
| Test standard | GRS |
| Usual packing | 200 pieces per polybag, 5000 per carton |
Properties that matter in buying
- Dimensional stability — 1% allowance is built into the spec before cutting.
- Colour fastness — tested to GRS on the actual base material, not on a substitute.
- Mechanical performance — abrasion resistance after 50 cycles or washes.
- Compliance — GRS documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Sportswear
- Bedding Sets
- Kidswear
- Coats
- Evening Wear
- Outdoor Tents
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover swing ticket, leather patch, mulberry silk fabric, woven hang tag, and the processes most often paired with shank button include anodising, water repellent finishing, sublimation printing.
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
