Glass Cord End for Coats — Specification, Uses and Sourcing Notes
Glass Cord End for Coats: Specification, Uses and Sourcing Notes
Glass Cord End is the version buyers specify for coats when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Glass gives cord end its weight-to-strength ratio. In practice that means the trim behaves differently in cutting, in finishing and in wear: shrinkage allowance has to be built into the spec. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Cord End |
|---|---|
| Base material | Glass |
| Standard size | 9 mm Width |
| Common finishes | Epoxy Doming, Laser Engraved Finish, Glossy Enamel Coating |
| Processes | UV Protection Finishing, Anti-Bacterial Finishing, Rotary Printing |
| Typical application | Coats |
| Related applications | Swimwear, Workwear, Sneakers, Activewear |
| Test standard | ISO 12947 Abrasion Resistance |
| Usual packing | 500 pieces per polybag, 5000 per carton |
Properties that matter in buying
- Dimensional stability — 2% allowance is built into the spec before cutting.
- Colour fastness — tested to ISO 12947 Abrasion Resistance on the actual base material, not on a substitute.
- Mechanical performance — abrasion resistance after 30 cycles or washes.
- Compliance — ISO 12947 Abrasion Resistance documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Baby Clothing
- Boots
- Jackets
- Swimwear
- Workwear
- Sneakers
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover pvc patch, shoulder patch, core spun thread, zipper guard, and the processes most often paired with cord end include mercerising, singeing, anti-static finishing.
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
