Nylon Metallic Thread for Blazers — Specification, Uses and Sourcing Notes
Nylon Metallic Thread for Blazers: Specification, Uses and Sourcing Notes
Nylon Metallic Thread is the version buyers specify for blazers when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Nylon gives metallic thread its durability under wash and abrasion. In practice that means the trim behaves differently in cutting, in finishing and in wear: the finish has to be applied before assembly. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Metallic Thread |
|---|---|
| Base material | Nylon |
| Standard size | 9 mm Width |
| Common finishes | Antique Brass Plating, Gunmetal Finish, Yarn-Dyed Finish |
| Processes | Weaving, Warp Knitting, Weft Knitting |
| Typical application | Blazers |
| Related applications | Outdoor Tents, Uniforms, Dresses, Coats |
| Test standard | CPSIA |
| Usual packing | 200 pieces per polybag, 10000 per carton |
Properties that matter in buying
- Dimensional stability — 2% allowance is built into the spec before cutting.
- Colour fastness — tested to CPSIA on the actual base material, not on a substitute.
- Mechanical performance — elastic recovery after 30 cycles or washes.
- Compliance — CPSIA documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Dresses
- Uniforms
- Backpacks
- Swimwear
- Home Curtains
- Lingerie
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover resin button, waterproof seam seal tape, softshell fabric, silicone patch, and the processes most often paired with metallic thread include flame retardant finishing, digital printing, anodising.
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
