Nylon Woven Hang Tag for Scarves — Specification, Uses and Sourcing Notes
Nylon Woven Hang Tag for Scarves: Specification, Uses and Sourcing Notes
Nylon Woven Hang Tag is the version buyers specify for scarves when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Nylon gives woven hang tag its drape and hand feel. In practice that means the trim behaves differently in cutting, in finishing and in wear: tighter tolerance is needed on the finished dimension. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Woven Hang Tag |
|---|---|
| Base material | Nylon |
| Standard size | 25 mm Width |
| Common finishes | Sandblasted Finish, Powder Coating, Pearlescent Coating |
| Processes | Brushing, Injection Moulding, Warp Knitting |
| Typical application | Scarves |
| Related applications | Jackets, Sleepwear, Workwear, Bedding Sets |
| Test standard | OEKO-TEX Standard 100 |
| Usual packing | 500 pieces per polybag, 5000 per carton |
Properties that matter in buying
- Dimensional stability — 1% allowance is built into the spec before cutting.
- Colour fastness — tested to OEKO-TEX Standard 100 on the actual base material, not on a substitute.
- Mechanical performance — cycle life after 20 cycles or washes.
- Compliance — OEKO-TEX Standard 100 documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Baby Clothing
- Uniforms
- Activewear
- Lingerie
- Upholstery
- Yoga Wear
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover hook and eye, flame retardant fabric, press stud, metal zipper, and the processes most often paired with woven hang tag include electroplating, weft knitting, bonding.
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
