Nickel Silver Tack Button for Bags — Specification, Uses and Sourcing Notes
Nickel Silver Tack Button for Bags: Specification, Uses and Sourcing Notes
Nickel Silver Tack Button is the version buyers specify for bags when the base material is fixed by performance rather than by price. This entry sets out what the material actually changes, which specification to write into the tech pack, and where the cost sits — the three questions that decide whether the item passes bulk approval.
What it is
Nickel Silver gives tack button its drape and hand feel. In practice that means the trim behaves differently in cutting, in finishing and in wear: tighter tolerance is needed on the finished dimension. Buyers who specify the material up front avoid the most common failure — an item that looks right on the sample card and behaves differently in bulk.
Typical specification
| Item | Tack Button |
|---|---|
| Base material | Nickel Silver |
| Standard size | 5# Gauge |
| Common finishes | UV Printing, Anodised Finish, Epoxy Doming |
| Processes | Metal Stamping, Anodising, Stone Washing |
| Typical application | Bags |
| Related applications | Jackets, Backpacks, Suits, Blouses |
| Test standard | WRAP |
| Usual packing | 200 pieces per polybag, 2000 per carton |
Properties that matter in buying
- Dimensional stability — 2% allowance is built into the spec before cutting.
- Colour fastness — tested to WRAP on the actual base material, not on a substitute.
- Mechanical performance — cycle life after 50 cycles or washes.
- Compliance — WRAP documentation issued with the shipment.
- Consistency — the approved counter sample becomes the reference for every reorder.
Common uses
- Upholstery
- Sleepwear
- Gloves
- Scarves
- Bedding Sets
- Socks
How to specify it
- Name the base material in the tech pack, not just the item.
- Fix the size and tolerance in writing before sampling starts.
- Approve a counter sample made from the actual bulk base material.
- Order the test report against the standard your market requires.
- Retain a golden sample at the factory and a second one with you.
Related reading
Related specifications on this site cover anti-bacterial fabric, shell button, seam tape, sweatshirt fleece, and the processes most often paired with tack button include ultrasonic welding, flame retardant finishing, rotary printing.
If you are comparing suppliers, send us the spec they quoted against. We will quote the same spec and show you where the difference sits.
