Resin Button with Pearlescent Coating for Boots
This resin button is supplied to a written specification so that reorders match the approved sample. The product spec is fixed at quotation stage — base material, the pearlescent coating surface, the 5# Gauge and the packing — and held on file, which is what keeps boots consistent across seasons instead of drifting with whatever the mill happens to have in stock.
The usual reason buyers come to us is not price. It is a trim that passed sampling but failed in-line because it was never cycle tested, or shade drift between the approved lab dip and the bulk lot. Both are preventable once the specification is written down before bulk starts.
Specification
| Product | Resin Button |
|---|---|
| Finish / process | Pearlescent Coating |
| Typical application | Boots |
| Base material | Nylon |
| Standard size | 5# Gauge |
| Colour matching | 24 Pantone or lab-dip matched shades |
| MOQ | 500 pieces per specification |
| Sampling | 10 working days, 3 days per revision |
| Bulk lead time | 15-55 days after approval |
| Compliance | GRS |
Material and finish options
- Acrylic — selected when the item is in skin contact and needs to test clean
- Aluminium — chosen where strength and wear resistance come first
- Rubber — chosen where strength and wear resistance come first
- Iron — preferred when weight matters more than rigidity
- Polyester — the cost-effective default for volume programmes
Processes available on this item
- Flame Retardant Finishing
- Electroplating
- Brushing
- Embossing
- Calendering
- Laminating
Where it is used
The specification above is the one most often ordered for Boots. Related applications on the same base include workwear, upholstery, sneakers, footwear, backpacks.
Quality and packing
- In-line inspection with AQL 4.0 sampling on every lot.
- Photo report shared before the balance payment is due.
- Packed to your own carton ratio and barcode specification.
- Test reports issued against GRS with the shipment.
- Golden sample retained at the factory, second one held by the buyer.
FAQ
Do you hold stock for reorders?
Approved specifications are kept on file and, for repeat programmes, base material can be reserved against a rolling forecast.
What happens if a bulk lot fails inspection?
The lot is reworked or remade at our cost. Inspection reports are shared before the balance payment is due.
Can you match a physical sample?
Yes. Send the reference and we reverse engineer the specification, then produce a counter sample for approval before any bulk commitment.
Which compliance documents do you provide?
GRS documentation is issued with the shipment. Test reports can be ordered against any additional standard you nominate.
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
