Nylon Fabric with Black Nickel Finish for Sportswear
This nylon fabric is supplied to a written specification so that reorders match the approved sample. The fabric construction is fixed at quotation stage — base material, the black nickel finish surface, the 240 gsm and the packing — and held on file, which is what keeps sportswear consistent across seasons instead of drifting with whatever the mill happens to have in stock.
The usual reason buyers come to us is not price. It is a trim that passed sampling but failed in-line because it was never cycle tested, or shrinkage that only showed up after the first wash. Both are preventable once the specification is written down before bulk starts.
Specification
| Product | Nylon Fabric |
|---|---|
| Finish / process | Black Nickel Finish |
| Typical application | Sportswear |
| Base material | Polyester |
| Standard size | 240 gsm |
| Colour matching | 16 Pantone or lab-dip matched shades |
| MOQ | 5,000 pieces per specification |
| Sampling | 10 working days, 5 days per revision |
| Bulk lead time | 25-55 days after approval |
| Compliance | Bluesign |
Material and finish options
- Recycled PET — preferred when weight matters more than rigidity
- Genuine Leather — used when the finish has to hold a plating or coating
- Stainless Steel — chosen where strength and wear resistance come first
- ABS Resin — preferred when weight matters more than rigidity
- Nickel Silver — chosen where strength and wear resistance come first
Processes available on this item
- Rotary Printing
- Anti-Bacterial Finishing
- Weaving
- Heat Setting
- Die Casting
- UV Protection Finishing
Where it is used
The specification above is the one most often ordered for Sportswear. Related applications on the same base include sportswear, evening wear, jeans, lingerie, swimwear.
Quality and packing
- In-line inspection with AQL 2.5 sampling on every lot.
- Photo report shared before the balance payment is due.
- Packed to your own carton ratio and barcode specification.
- Test reports issued against Bluesign with the shipment.
- Golden sample retained at the factory, second one held by the buyer.
FAQ
How long does sampling take?
10 working days for the first sample, with 5 days per revision round. Plated or dyed-to-match items add a few days.
What happens if a bulk lot fails inspection?
The lot is reworked or remade at our cost. Inspection reports are shared before the balance payment is due.
Can you match a physical sample?
Yes. Send the reference and we reverse engineer the specification, then produce a counter sample for approval before any bulk commitment.
Can you handle our own artwork or tooling?
Yes. Artwork files or existing tooling can be used; we confirm tolerances in writing before the first production run.
Send the reference sample or tech pack and we will come back with a costed specification, a sampling timetable and the compliance documents your market requires.
