Custom Rivet in Nickel-Free Alloy with Injection Moulding for Uniform and Corporate Programmes

Custom Rivet — Nickel-Free Alloy with Injection Moulding

We supply rivet to garment factories and brands, built in Nickel-Free Alloy with injection moulding for uniform and corporate programmes. On a trim like this the specification that decides the outcome is setting pressure, which cracks caps if it is wrong in either direction, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 5000 pieces per style per finish.

The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or shade variation within one carton. We lock material, finish, dimension and tolerance before bulk, and prepare REACH and GPSR documentation so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Antique Brass Plating — available on Nickel-Free Alloy, quoted per position and per colour.
• Sewn Edge — available on Nickel-Free Alloy, quoted per position and per colour.
• Digital Printing — available on Nickel-Free Alloy, quoted per position and per colour.
• Dye-Sublimation Printing — available on Nickel-Free Alloy, quoted per position and per colour.
• Laser Engraving — available on Nickel-Free Alloy, quoted per position and per colour.
• Mirror Polish — available on Nickel-Free Alloy, quoted per position and per colour.
• Ultrasonic Welding — available on Nickel-Free Alloy, quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed cap diameter
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with injection moulding applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for REACH nickel-release test for metal findings are prepared for the destination market. We ship to Rotterdam or Felixstowe with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same setting pressure.

FAQ

Which compliance documents do you provide?

We prepare REACH nickel-release test for metal findings and the supporting test reports for the destination market.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

Start your rivet programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.