Custom Badge — Neoprene with Embossing
We supply badge to garment factories and brands, built in Neoprene with embossing for childrenswear and schoolwear. On a trim like this the specification that decides the outcome is plating thickness, which decides how long the badge survives wear, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 2000 pieces per style per finish.
The failures here are predictable: packing that arrives mixed and unusable on the line, or inconsistent sizing between production runs. We lock material, finish, dimension and tolerance before bulk, and prepare SNI or SIRIM documentation per destination so the shipment clears instead of sitting at port while your selling season passes.
Specification
| Product | Badge |
|---|---|
| Attachment | safety pin |
| Size | 30 mm |
| Base material | Neoprene |
| Finish / process | Embossing |
| Colour options | 16 Pantone-matched shades |
| Packing | polybag per 100 |
| MOQ | 2000 pieces per style per finish |
| Sampling | 10 working days, 3 days per revision |
| Bulk lead time | 20-40 days after approval |
| Compliance | SNI or SIRIM documentation per destination; OEKO-TEX Standard 100 for dyes and trims |
| Ship to | Jakarta or Port Klang (Asia-Pacific) |
What buyers can customise
- Nickel Plating — available on Neoprene, quoted per position and per colour.
- Fringe Finish — available on Neoprene, quoted per position and per colour.
- Hot Foil Stamping — available on Neoprene, quoted per position and per colour.
- Brushed Finish — available on Neoprene, quoted per position and per colour.
- Chrome Plating — available on Neoprene, quoted per position and per colour.
- Dye-Sublimation Printing — available on Neoprene, quoted per position and per colour.
- Injection Moulding — available on Neoprene, quoted per position and per colour.
How we produce it
- Drawing or reference sample review, with size and finish confirmed
- Material selection and a finish sample or strike-off
- Prototype made to the agreed attachment
- Fit and wash test on the actual garment fabric, then a pre-production sample
- Bulk run with embossing applied under controlled settings
- In-line inspection, final AQL 2.5 inspection and packing to your ratio
Where it is used
- Denim and workwear — hard-wearing finishes that survive industrial washing
- Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
- Childrenswear and schoolwear — tested to the destination's safety standard
- Bridal and eveningwear — small runs with hand-finished detail
- Uniform and corporate programmes — repeatable spec held on file for reorders
Packing, testing and delivery
Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for OEKO-TEX Standard 100 for dyes and trims are prepared for the destination market. We ship to Jakarta or Port Klang with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same plating thickness.
FAQ
What is the minimum order?
Programmes start at 2000 pieces per style per finish. Mixed sizes are fine within one style.
How long does sampling take?
A first sample takes 10 working days, and each revision about 3 days.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Which compliance documents do you provide?
We prepare OEKO-TEX Standard 100 for dyes and trims and the supporting test reports for the destination market.
Start your badge programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
