Custom Rivet — Brass with Brushed Finish
We supply rivet to garment factories and brands, built in Brass with brushed finish for bridal and eveningwear studios. On a trim like this the specification that decides the outcome is setting pressure, which cracks caps if it is wrong in either direction, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 1000 pieces per style per finish.
The failures here are predictable: colour drift between the approved sample and the bulk trim, or inconsistent sizing between production runs. We lock material, finish, dimension and tolerance before bulk, and prepare CPSIA and California Prop 65 compliance so the shipment clears instead of sitting at port while your selling season passes.
Specification
| Product | Rivet |
|---|---|
| Cap diameter | 15 mm |
| Type | semi-tubular rivet |
| Base material | Brass |
| Finish / process | Brushed Finish |
| Colour options | 24 Pantone-matched shades |
| Packing | polybag per 100 |
| MOQ | 1000 pieces per style per finish |
| Sampling | 10 working days, 3 days per revision |
| Bulk lead time | 20-30 days after approval |
| Compliance | CPSIA and California Prop 65 compliance; salt spray test for metal finishes |
| Ship to | Los Angeles or New York (North America) |
What buyers can customise
- Antique Silver — available on Brass, quoted per position and per colour.
- Anti-Rust Treatment — available on Brass, quoted per position and per colour.
- Overlocked Edge — available on Brass, quoted per position and per colour.
- Injection Moulding — available on Brass, quoted per position and per colour.
- Chrome Plating — available on Brass, quoted per position and per colour.
- UV Printing — available on Brass, quoted per position and per colour.
- Gunmetal Plating — available on Brass, quoted per position and per colour.
How we produce it
- Drawing or reference sample review, with size and finish confirmed
- Material selection and a finish sample or strike-off
- Prototype made to the agreed cap diameter
- Fit and wash test on the actual garment fabric, then a pre-production sample
- Bulk run with brushed finish applied under controlled settings
- In-line inspection, final AQL 2.5 inspection and packing to your ratio
Where it is used
- Denim and workwear — hard-wearing finishes that survive industrial washing
- Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
- Childrenswear and schoolwear — tested to the destination's safety standard
- Bridal and eveningwear — small runs with hand-finished detail
- Uniform and corporate programmes — repeatable spec held on file for reorders
Packing, testing and delivery
Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Los Angeles or New York with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same setting pressure.
FAQ
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
How long does sampling take?
A first sample takes 10 working days, and each revision about 3 days.
Start your rivet programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
