Custom Rivet — Aluminium with Stamping
We supply rivet to garment factories and brands, built in Aluminium with stamping for e-commerce and small-batch brands. On a trim like this the specification that decides the outcome is cap-to-post fit, so the rivet does not spin after setting, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 1000 pieces per style per finish.
The failures here are predictable: a supplier who disappears once the deposit is paid, or minimum order quantities far above what a growing brand can absorb. We lock material, finish, dimension and tolerance before bulk, and prepare CPSIA and California Prop 65 compliance so the shipment clears instead of sitting at port while your selling season passes.
Specification
| Product | Rivet |
|---|---|
| Cap diameter | 10 mm |
| Type | semi-tubular rivet |
| Base material | Aluminium |
| Finish / process | Stamping |
| Colour options | 16 Pantone-matched shades |
| Packing | carded |
| MOQ | 1000 pieces per style per finish |
| Sampling | 14 working days, 4 days per revision |
| Bulk lead time | 20-40 days after approval |
| Compliance | CPSIA and California Prop 65 compliance; OEKO-TEX Standard 100 for dyes and trims |
| Ship to | Los Angeles or New York (North America) |
What buyers can customise
- Epoxy Dome — available on Aluminium, quoted per position and per colour.
- Antique Brass Plating — available on Aluminium, quoted per position and per colour.
- Chrome Plating — available on Aluminium, quoted per position and per colour.
- Embossing — available on Aluminium, quoted per position and per colour.
- Rose Gold Plating — available on Aluminium, quoted per position and per colour.
- Stamping — available on Aluminium, quoted per position and per colour.
- Laser Engraving — available on Aluminium, quoted per position and per colour.
How we produce it
- Drawing or reference sample review, with size and finish confirmed
- Material selection and a finish sample or strike-off
- Prototype made to the agreed cap diameter
- Fit and wash test on the actual garment fabric, then a pre-production sample
- Bulk run with stamping applied under controlled settings
- In-line inspection, final AQL 2.5 inspection and packing to your ratio
Where it is used
- Denim and workwear — hard-wearing finishes that survive industrial washing
- Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
- Childrenswear and schoolwear — tested to the destination's safety standard
- Bridal and eveningwear — small runs with hand-finished detail
- Uniform and corporate programmes — repeatable spec held on file for reorders
Packing, testing and delivery
Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for OEKO-TEX Standard 100 for dyes and trims are prepared for the destination market. We ship to Los Angeles or New York with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same cap-to-post fit.
FAQ
How long does sampling take?
A first sample takes 14 working days, and each revision about 4 days.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
What is the minimum order?
Programmes start at 1000 pieces per style per finish. Mixed sizes are fine within one style.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Start your rivet programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
