Custom Braided Trim in Coconut Shell with Die-Casting for Outerwear and Jacket Programmes

Custom Braided Trim — Coconut Shell with Die-Casting

We supply braided trim to garment factories and brands, built in Coconut Shell with die-casting for denim and workwear programmes. On a trim like this the specification that decides the outcome is wash shrinkage, because braid that shrinks puckers the seam, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 1000 pieces per style per finish.

The failures here are predictable: inconsistent sizing between production runs, or a finish that tarnishes or rubs off after washing. We lock material, finish, dimension and tolerance before bulk, and prepare GSO conformity with Arabic labelling so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Overlocked Edge — available on Coconut Shell, quoted per position and per colour.
• Beaded Detail — available on Coconut Shell, quoted per position and per colour.
• Ultrasonic Welding — available on Coconut Shell, quoted per position and per colour.
• Sewn Edge — available on Coconut Shell, quoted per position and per colour.
• Woven Jacquard — available on Coconut Shell, quoted per position and per colour.
• Braided Weave — available on Coconut Shell, quoted per position and per colour.
• Mercerised Finish — available on Coconut Shell, quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed width
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with die-casting applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for REACH nickel-release test for metal findings are prepared for the destination market. We ship to Jebel Ali with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same wash shrinkage.

FAQ

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

How long does sampling take?

A first sample takes 7 working days, and each revision about 5 days.

Start your braided trim programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.