Custom Hook and Loop Tape — Spandex Blend with Stamping
We supply hook and loop tape to garment factories and brands, built in Spandex Blend with stamping for uniform and corporate programmes. On a trim like this the specification that decides the outcome is peel and shear strength after repeated cycles, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 5000 pieces per style per finish.
The failures here are predictable: packing that arrives mixed and unusable on the line, or unclear responsibility when a defect shows up after washing. We lock material, finish, dimension and tolerance before bulk, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the shipment clears instead of sitting at port while your selling season passes.
Specification
| Product | Hook and Loop Tape |
|---|---|
| Width | 20 mm |
| Type | iron-on tape |
| Base material | Spandex Blend |
| Finish / process | Stamping |
| Colour options | 6 Pantone-matched shades |
| Packing | bulk packed |
| MOQ | 5000 pieces per style per finish |
| Sampling | 7 working days, 4 days per revision |
| Bulk lead time | 15-30 days after approval |
| Compliance | GB 18401 safety classification with GB/T 29862 fibre labelling; OEKO-TEX Standard 100 for dyes and trims |
| Ship to | Shanghai or Shenzhen (Mainland China) |
What buyers can customise
- Anti-Rust Treatment — available on Spandex Blend, quoted per position and per colour.
- Ultrasonic Welding — available on Spandex Blend, quoted per position and per colour.
- Injection Moulding — available on Spandex Blend, quoted per position and per colour.
- Stamping — available on Spandex Blend, quoted per position and per colour.
- Yarn Dyeing — available on Spandex Blend, quoted per position and per colour.
- Woven Jacquard — available on Spandex Blend, quoted per position and per colour.
- Soft Enamel Fill — available on Spandex Blend, quoted per position and per colour.
How we produce it
- Drawing or reference sample review, with size and finish confirmed
- Material selection and a finish sample or strike-off
- Prototype made to the agreed width
- Fit and wash test on the actual garment fabric, then a pre-production sample
- Bulk run with stamping applied under controlled settings
- In-line inspection, final AQL 2.5 inspection and packing to your ratio
Where it is used
- Denim and workwear — hard-wearing finishes that survive industrial washing
- Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
- Childrenswear and schoolwear — tested to the destination's safety standard
- Bridal and eveningwear — small runs with hand-finished detail
- Uniform and corporate programmes — repeatable spec held on file for reorders
Packing, testing and delivery
Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for OEKO-TEX Standard 100 for dyes and trims are prepared for the destination market. We ship to Shanghai or Shenzhen with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same peel and shear strength after repeated cycles.
FAQ
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
What is the minimum order?
Programmes start at 5000 pieces per style per finish. Mixed sizes are fine within one style.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
How long does sampling take?
A first sample takes 7 working days, and each revision about 4 days.
Start your hook and loop tape programme
Tell us the quantity, the target price and the delivery window — we will tell you what is realistic before you commit.
