Custom Interlining in Genuine Leather with Epoxy Dome for Uniform and Corporate Programmes

Custom Interlining — Genuine Leather with Epoxy Dome

We supply interlining to garment factories and brands, built in Genuine Leather with epoxy dome for childrenswear and schoolwear. On a trim like this the specification that decides the outcome is fusing window — temperature, pressure and time that actually bond, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 1000 pieces per style per finish.

The failures here are predictable: packing that arrives mixed and unusable on the line, or colour drift between the approved sample and the bulk trim. We lock material, finish, dimension and tolerance before bulk, and prepare CPSIA and California Prop 65 compliance so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Anti-Rust Treatment — available on Genuine Leather, quoted per position and per colour.
• Mercerised Finish — available on Genuine Leather, quoted per position and per colour.
• Braided Weave — available on Genuine Leather, quoted per position and per colour.
• Woven Jacquard — available on Genuine Leather, quoted per position and per colour.
• Embroidery — available on Genuine Leather, quoted per position and per colour.
• Epoxy Dome — available on Genuine Leather, quoted per position and per colour.
• Pleating — available on Genuine Leather, quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed weight
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with epoxy dome applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for EN 71 part 3 for decorative components are prepared for the destination market. We ship to Los Angeles or New York with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same fusing window — temperature.

FAQ

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

How long does sampling take?

A first sample takes 7 working days, and each revision about 5 days.

Which compliance documents do you provide?

We prepare EN 71 part 3 for decorative components and the supporting test reports for the destination market.

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

Start your interlining programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.