Custom Button in Aluminium with Heat Transfer Printing for Uniform and Corporate Programmes

Custom Button — Aluminium with Heat Transfer Printing

We supply button to garment factories and brands, built in Aluminium with heat transfer printing for denim and workwear programmes. On a trim like this the specification that decides the outcome is shade match across a full box, since buttons are bought by the gross, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 1000 pieces per style per finish.

The failures here are predictable: shade variation within one carton, or inconsistent sizing between production runs. We lock material, finish, dimension and tolerance before bulk, and prepare GSO conformity with Arabic labelling so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Hot Foil Stamping — available on Aluminium, quoted per position and per colour.
• Fringe Finish — available on Aluminium, quoted per position and per colour.
• Antique Brass Plating — available on Aluminium, quoted per position and per colour.
• Hard Enamel Fill — available on Aluminium, quoted per position and per colour.
• Overlocked Edge — available on Aluminium, quoted per position and per colour.
• Gold Plating — available on Aluminium, quoted per position and per colour.
• Sewn Edge — available on Aluminium, quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed ligne
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with heat transfer printing applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Jebel Ali with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same shade match across a full box.

FAQ

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

How long does sampling take?

A first sample takes 7 working days, and each revision about 4 days.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Start your button programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.