Custom Patch in ABS Plastic with Ultrasonic Welding for Bridal and Eveningwear Studios

Custom Patch — ABS Plastic with Ultrasonic Welding

We supply patch to garment factories and brands, built in ABS Plastic with ultrasonic welding for uniform and corporate programmes. On a trim like this the specification that decides the outcome is adhesive activation temperature on the actual shell fabric, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 2000 pieces per style per finish.

The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or inconsistent sizing between production runs. We lock material, finish, dimension and tolerance before bulk, and prepare SNI or SIRIM documentation per destination so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Fringe Finish — available on ABS Plastic, quoted per position and per colour.
• Knitted Structure — available on ABS Plastic, quoted per position and per colour.
• Ultrasonic Welding — available on ABS Plastic, quoted per position and per colour.
• Die-Casting — available on ABS Plastic, quoted per position and per colour.
• Soft Enamel Fill — available on ABS Plastic, quoted per position and per colour.
• Rubber Coating — available on ABS Plastic, quoted per position and per colour.
• Anti-Rust Treatment — available on ABS Plastic, quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed size
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with ultrasonic welding applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for GRS recycled content claim are prepared for the destination market. We ship to Jakarta or Port Klang with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same adhesive activation temperature on the actual shell fabric.

FAQ

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

How long does sampling take?

A first sample takes 12 working days, and each revision about 5 days.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Start your patch programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.