Custom Patch — Polyethylene (PE) with Die-Casting
We supply patch to garment factories and brands, built in Polyethylene (PE) with die-casting for bridal and eveningwear studios. On a trim like this the specification that decides the outcome is stitch density on an embroidered patch — density drives the price, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 2000 pieces per style per finish.
The failures here are predictable: unclear responsibility when a defect shows up after washing, or colour drift between the approved sample and the bulk trim. We lock material, finish, dimension and tolerance before bulk, and prepare SNI or SIRIM documentation per destination so the shipment clears instead of sitting at port while your selling season passes.
Specification
| Product | Patch |
|---|---|
| Size | 90 x 110 mm |
| Backing | adhesive backing |
| Base material | Polyethylene (PE) |
| Finish / process | Die-Casting |
| Colour options | 12 Pantone-matched shades |
| Packing | packed to your size ratio |
| MOQ | 2000 pieces per style per finish |
| Sampling | 14 working days, 5 days per revision |
| Bulk lead time | 15-50 days after approval |
| Compliance | SNI or SIRIM documentation per destination; salt spray test for metal finishes |
| Ship to | Jakarta or Port Klang (Asia-Pacific) |
What buyers can customise
- Offset Printing — available on Polyethylene (PE), quoted per position and per colour.
- Screen Printing — available on Polyethylene (PE), quoted per position and per colour.
- Sewn Edge — available on Polyethylene (PE), quoted per position and per colour.
- Fringe Finish — available on Polyethylene (PE), quoted per position and per colour.
- Piece Dyeing — available on Polyethylene (PE), quoted per position and per colour.
- Embossing — available on Polyethylene (PE), quoted per position and per colour.
- Epoxy Dome — available on Polyethylene (PE), quoted per position and per colour.
How we produce it
- Drawing or reference sample review, with size and finish confirmed
- Material selection and a finish sample or strike-off
- Prototype made to the agreed size
- Fit and wash test on the actual garment fabric, then a pre-production sample
- Bulk run with die-casting applied under controlled settings
- In-line inspection, final AQL 2.5 inspection and packing to your ratio
Where it is used
- Denim and workwear — hard-wearing finishes that survive industrial washing
- Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
- Childrenswear and schoolwear — tested to the destination's safety standard
- Bridal and eveningwear — small runs with hand-finished detail
- Uniform and corporate programmes — repeatable spec held on file for reorders
Packing, testing and delivery
Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Jakarta or Port Klang with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same stitch density on an embroidered patch — density drives the price.
FAQ
How long does sampling take?
A first sample takes 14 working days, and each revision about 5 days.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
What is the minimum order?
Programmes start at 2000 pieces per style per finish. Mixed sizes are fine within one style.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
Start your patch programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
