Custom Patch in ABS Plastic with Heat-Cut Edge for E-commerce and Small-Batch Brands

Custom Patch — ABS Plastic with Heat-Cut Edge

We supply patch to garment factories and brands, built in ABS Plastic with heat-cut edge for e-commerce and small-batch brands. On a trim like this the specification that decides the outcome is adhesive activation temperature on the actual shell fabric, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 500 pieces per style per finish.

The failures here are predictable: shade variation within one carton, or packing that arrives mixed and unusable on the line. We lock material, finish, dimension and tolerance before bulk, and prepare UKCA and REACH documentation so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Overlocked Edge — available on ABS Plastic, quoted per position and per colour.
• Sewn Edge — available on ABS Plastic, quoted per position and per colour.
• Die-Casting — available on ABS Plastic, quoted per position and per colour.
• Epoxy Dome — available on ABS Plastic, quoted per position and per colour.
• Screen Printing — available on ABS Plastic, quoted per position and per colour.
• Pantone Colour Matching — available on ABS Plastic, quoted per position and per colour.
• Pleating — available on ABS Plastic, quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed size
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with heat-cut edge applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for GRS recycled content claim are prepared for the destination market. We ship to Felixstowe with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same adhesive activation temperature on the actual shell fabric.

FAQ

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

Start your patch programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.