Custom Patch — Satin with UV Printing
We supply patch to garment factories and brands, built in Satin with uv printing for bridal and eveningwear studios. On a trim like this the specification that decides the outcome is stitch density on an embroidered patch — density drives the price, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 5000 pieces per style per finish.
The failures here are predictable: packing that arrives mixed and unusable on the line, or a finish that tarnishes or rubs off after washing. We lock material, finish, dimension and tolerance before bulk, and prepare UKCA and REACH documentation so the shipment clears instead of sitting at port while your selling season passes.
Specification
| Product | Patch |
|---|---|
| Size | 50 x 50 mm |
| Backing | sew-on backing |
| Base material | Satin |
| Finish / process | UV Printing |
| Colour options | 16 Pantone-matched shades |
| Packing | bulk packed |
| MOQ | 5000 pieces per style per finish |
| Sampling | 7 working days, 3 days per revision |
| Bulk lead time | 20-40 days after approval |
| Compliance | UKCA and REACH documentation; salt spray test for metal finishes |
| Ship to | Felixstowe (the United Kingdom) |
What buyers can customise
- Heat Transfer Printing — available on Satin, quoted per position and per colour.
- Crochet — available on Satin, quoted per position and per colour.
- Soft Enamel Fill — available on Satin, quoted per position and per colour.
- Die-Casting — available on Satin, quoted per position and per colour.
- Piece Dyeing — available on Satin, quoted per position and per colour.
- Overlocked Edge — available on Satin, quoted per position and per colour.
- Woven Jacquard — available on Satin, quoted per position and per colour.
How we produce it
- Drawing or reference sample review, with size and finish confirmed
- Material selection and a finish sample or strike-off
- Prototype made to the agreed size
- Fit and wash test on the actual garment fabric, then a pre-production sample
- Bulk run with uv printing applied under controlled settings
- In-line inspection, final AQL 2.5 inspection and packing to your ratio
Where it is used
- Denim and workwear — hard-wearing finishes that survive industrial washing
- Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
- Childrenswear and schoolwear — tested to the destination's safety standard
- Bridal and eveningwear — small runs with hand-finished detail
- Uniform and corporate programmes — repeatable spec held on file for reorders
Packing, testing and delivery
Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Felixstowe with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same stitch density on an embroidered patch — density drives the price.
FAQ
How long does sampling take?
A first sample takes 7 working days, and each revision about 3 days.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Which compliance documents do you provide?
We prepare salt spray test for metal finishes and the supporting test reports for the destination market.
Start your patch programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
