Custom Webbing — PVC with Braided Weave
We supply webbing to garment factories and brands, built in PVC with braided weave for outerwear and jacket programmes. On a trim like this the specification that decides the outcome is edge stiffness, which decides how it feeds through hardware, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 500 pieces per style per finish.
The failures here are predictable: a supplier who disappears once the deposit is paid, or shade variation within one carton. We lock material, finish, dimension and tolerance before bulk, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the shipment clears instead of sitting at port while your selling season passes.
Specification
| Product | Webbing |
|---|---|
| Width | 25 mm |
| Type | jacquard webbing |
| Base material | PVC |
| Finish / process | Braided Weave |
| Colour options | 24 Pantone-matched shades |
| Packing | carded |
| MOQ | 500 pieces per style per finish |
| Sampling | 7 working days, 5 days per revision |
| Bulk lead time | 25-40 days after approval |
| Compliance | GB 18401 safety classification with GB/T 29862 fibre labelling; colour fastness to washing, rubbing and light |
| Ship to | Shanghai or Shenzhen (Mainland China) |
What buyers can customise
- Piece Dyeing — available on PVC, quoted per position and per colour.
- Paint Spray — available on PVC, quoted per position and per colour.
- Mercerised Finish — available on PVC, quoted per position and per colour.
- Rubber Coating — available on PVC, quoted per position and per colour.
- Embossing — available on PVC, quoted per position and per colour.
- Digital Printing — available on PVC, quoted per position and per colour.
- Yarn Dyeing — available on PVC, quoted per position and per colour.
How we produce it
- Drawing or reference sample review, with size and finish confirmed
- Material selection and a finish sample or strike-off
- Prototype made to the agreed width
- Fit and wash test on the actual garment fabric, then a pre-production sample
- Bulk run with braided weave applied under controlled settings
- In-line inspection, final AQL 2.5 inspection and packing to your ratio
Where it is used
- Denim and workwear — hard-wearing finishes that survive industrial washing
- Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
- Childrenswear and schoolwear — tested to the destination's safety standard
- Bridal and eveningwear — small runs with hand-finished detail
- Uniform and corporate programmes — repeatable spec held on file for reorders
Packing, testing and delivery
Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for colour fastness to washing, rubbing and light are prepared for the destination market. We ship to Shanghai or Shenzhen with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same edge stiffness.
FAQ
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
How long does sampling take?
A first sample takes 7 working days, and each revision about 5 days.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Which compliance documents do you provide?
We prepare colour fastness to washing, rubbing and light and the supporting test reports for the destination market.
Start your webbing programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
