Custom Rhinestone in Acrylic Rhinestone with Pantone Colour Matching for Uniform and Corporate Programmes

Custom Rhinestone — Acrylic Rhinestone with Pantone Colour Matching

We supply rhinestone to garment factories and brands, built in Acrylic Rhinestone with pantone colour matching for uniform and corporate programmes. On a trim like this the specification that decides the outcome is wash durability of the setting, measured in cycles, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 1000 pieces per style per finish.

The failures here are predictable: a finish that tarnishes or rubs off after washing, or minimum order quantities far above what a growing brand can absorb. We lock material, finish, dimension and tolerance before bulk, and prepare GSO conformity with Arabic labelling so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Hard Enamel Fill — available on Acrylic Rhinestone, quoted per position and per colour.
• Sewn Edge — available on Acrylic Rhinestone, quoted per position and per colour.
• Tassel Finish — available on Acrylic Rhinestone, quoted per position and per colour.
• Rose Gold Plating — available on Acrylic Rhinestone, quoted per position and per colour.
• Gold Plating — available on Acrylic Rhinestone, quoted per position and per colour.
• Anti-Rust Treatment — available on Acrylic Rhinestone, quoted per position and per colour.
• Ultrasonic Welding — available on Acrylic Rhinestone, quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed size
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with pantone colour matching applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for REACH nickel-release test for metal findings are prepared for the destination market. We ship to Jebel Ali with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same wash durability of the setting.

FAQ

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

How long does sampling take?

A first sample takes 10 working days, and each revision about 5 days.

What is the minimum order?

Programmes start at 1000 pieces per style per finish. Mixed sizes are fine within one style.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Start your rhinestone programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.