Custom Eyelet in Nickel-Free Alloy with Paint Spray for Uniform and Corporate Programmes

Custom Eyelet — Nickel-Free Alloy with Paint Spray

We supply eyelet to garment factories and brands, built in Nickel-Free Alloy with paint spray for bridal and eveningwear studios. On a trim like this the specification that decides the outcome is setting tooling tolerance, which decides whether the line runs clean, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 3000 pieces per style per finish.

The failures here are predictable: packing that arrives mixed and unusable on the line, or a finish that tarnishes or rubs off after washing. We lock material, finish, dimension and tolerance before bulk, and prepare REACH and GPSR documentation so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Rubber Coating — available on Nickel-Free Alloy, quoted per position and per colour.
• Chrome Plating — available on Nickel-Free Alloy, quoted per position and per colour.
• Antique Brass Plating — available on Nickel-Free Alloy, quoted per position and per colour.
• Hard Enamel Fill — available on Nickel-Free Alloy, quoted per position and per colour.
• Ultrasonic Welding — available on Nickel-Free Alloy, quoted per position and per colour.
• Gunmetal Plating — available on Nickel-Free Alloy, quoted per position and per colour.
• Die-Casting — available on Nickel-Free Alloy, quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed inner diameter
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with paint spray applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for colour fastness to washing, rubbing and light are prepared for the destination market. We ship to Rotterdam or Felixstowe with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same setting tooling tolerance.

FAQ

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

What is the minimum order?

Programmes start at 3000 pieces per style per finish. Mixed sizes are fine within one style.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

Start your eyelet programme

Tell us the quantity, the target price and the delivery window — we will tell you what is realistic before you commit.