Custom Eyelet — Polypropylene (PP) with Black Oxide
We supply eyelet to garment factories and brands, built in Polypropylene (PP) with black oxide for outerwear and jacket programmes. On a trim like this the specification that decides the outcome is plating that survives washing and contact with skin, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 5000 pieces per style per finish.
The failures here are predictable: a finish that tarnishes or rubs off after washing, or minimum order quantities far above what a growing brand can absorb. We lock material, finish, dimension and tolerance before bulk, and prepare REACH and GPSR documentation so the shipment clears instead of sitting at port while your selling season passes.
Specification
| Product | Eyelet |
|---|---|
| Inner diameter | 3 mm |
| Type | toothed washer eyelet |
| Base material | Polypropylene (PP) |
| Finish / process | Black Oxide |
| Colour options | 16 Pantone-matched shades |
| Packing | bulk packed |
| MOQ | 5000 pieces per style per finish |
| Sampling | 12 working days, 5 days per revision |
| Bulk lead time | 25-40 days after approval |
| Compliance | REACH and GPSR documentation; salt spray test for metal finishes |
| Ship to | Rotterdam or Felixstowe (Europe) |
What buyers can customise
- Rose Gold Plating — available on Polypropylene (PP), quoted per position and per colour.
- Soft Enamel Fill — available on Polypropylene (PP), quoted per position and per colour.
- Hard Enamel Fill — available on Polypropylene (PP), quoted per position and per colour.
- Epoxy Dome — available on Polypropylene (PP), quoted per position and per colour.
- Die-Casting — available on Polypropylene (PP), quoted per position and per colour.
- Gunmetal Plating — available on Polypropylene (PP), quoted per position and per colour.
- Stamping — available on Polypropylene (PP), quoted per position and per colour.
How we produce it
- Drawing or reference sample review, with size and finish confirmed
- Material selection and a finish sample or strike-off
- Prototype made to the agreed inner diameter
- Fit and wash test on the actual garment fabric, then a pre-production sample
- Bulk run with black oxide applied under controlled settings
- In-line inspection, final AQL 2.5 inspection and packing to your ratio
Where it is used
- Denim and workwear — hard-wearing finishes that survive industrial washing
- Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
- Childrenswear and schoolwear — tested to the destination's safety standard
- Bridal and eveningwear — small runs with hand-finished detail
- Uniform and corporate programmes — repeatable spec held on file for reorders
Packing, testing and delivery
Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Rotterdam or Felixstowe with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same plating that survives washing and contact with skin.
FAQ
What is the minimum order?
Programmes start at 5000 pieces per style per finish. Mixed sizes are fine within one style.
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
Do you ship to our forwarder?
Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Start your eyelet programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
