Custom Eyelet in ABS Plastic with Injection Moulding for Uniform and Corporate Programmes

Custom Eyelet — ABS Plastic with Injection Moulding

We supply eyelet to garment factories and brands, built in ABS Plastic with injection moulding for outerwear and jacket programmes. On a trim like this the specification that decides the outcome is washer bite, so the eyelet does not pull out of the cloth, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 5000 pieces per style per finish.

The failures here are predictable: unclear responsibility when a defect shows up after washing, or packing that arrives mixed and unusable on the line. We lock material, finish, dimension and tolerance before bulk, and prepare SNI or SIRIM documentation per destination so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• UV Printing — available on ABS Plastic, quoted per position and per colour.
• Anti-Rust Treatment — available on ABS Plastic, quoted per position and per colour.
• Gold Plating — available on ABS Plastic, quoted per position and per colour.
• Chrome Plating — available on ABS Plastic, quoted per position and per colour.
• Paint Spray — available on ABS Plastic, quoted per position and per colour.
• Nickel Plating — available on ABS Plastic, quoted per position and per colour.
• Antique Brass Plating — available on ABS Plastic, quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed inner diameter
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with injection moulding applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for CPSIA lead and phthalate testing are prepared for the destination market. We ship to Jakarta or Port Klang with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same washer bite.

FAQ

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

Which compliance documents do you provide?

We prepare CPSIA lead and phthalate testing and the supporting test reports for the destination market.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Start your eyelet programme

Tell us the quantity, the target price and the delivery window — we will tell you what is realistic before you commit.