Custom Eyelet in Nickel-Free Alloy with Soft Enamel Fill for Uniform and Corporate Programmes

Custom Eyelet — Nickel-Free Alloy with Soft Enamel Fill

We supply eyelet to garment factories and brands, built in Nickel-Free Alloy with soft enamel fill for uniform and corporate programmes. On a trim like this the specification that decides the outcome is washer bite, so the eyelet does not pull out of the cloth, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 500 pieces per style per finish.

The failures here are predictable: inconsistent sizing between production runs, or unclear responsibility when a defect shows up after washing. We lock material, finish, dimension and tolerance before bulk, and prepare UKCA and REACH documentation so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Soft Enamel Fill — available on Nickel-Free Alloy, quoted per position and per colour.
• Gunmetal Plating — available on Nickel-Free Alloy, quoted per position and per colour.
• Epoxy Dome — available on Nickel-Free Alloy, quoted per position and per colour.
• Sewn Edge — available on Nickel-Free Alloy, quoted per position and per colour.
• Anti-Rust Treatment — available on Nickel-Free Alloy, quoted per position and per colour.
• Die-Casting — available on Nickel-Free Alloy, quoted per position and per colour.
• Nickel Plating — available on Nickel-Free Alloy, quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed inner diameter
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with soft enamel fill applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for azo dye-free declaration are prepared for the destination market. We ship to Felixstowe with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same washer bite.

FAQ

Which compliance documents do you provide?

We prepare azo dye-free declaration and the supporting test reports for the destination market.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

Start your eyelet programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.