Custom Rhinestone in Polyethylene (PE) with Sewn Edge for Denim and Workwear Programmes

Custom Rhinestone — Polyethylene (PE) with Sewn Edge

We supply rhinestone to garment factories and brands, built in Polyethylene (PE) with sewn edge for outerwear and jacket programmes. On a trim like this the specification that decides the outcome is wash durability of the setting, measured in cycles, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 2000 pieces per style per finish.

The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or packing that arrives mixed and unusable on the line. We lock material, finish, dimension and tolerance before bulk, and prepare REACH and GPSR documentation so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Overlocked Edge — available on Polyethylene (PE), quoted per position and per colour.
• Rose Gold Plating — available on Polyethylene (PE), quoted per position and per colour.
• Gunmetal Plating — available on Polyethylene (PE), quoted per position and per colour.
• Soft Enamel Fill — available on Polyethylene (PE), quoted per position and per colour.
• Chrome Plating — available on Polyethylene (PE), quoted per position and per colour.
• Stamping — available on Polyethylene (PE), quoted per position and per colour.
• Mirror Polish — available on Polyethylene (PE), quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed size
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with sewn edge applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for EN 71 part 3 for decorative components are prepared for the destination market. We ship to Rotterdam or Felixstowe with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same wash durability of the setting.

FAQ

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Which compliance documents do you provide?

We prepare EN 71 part 3 for decorative components and the supporting test reports for the destination market.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

Start your rhinestone programme

Tell us the quantity, the target price and the delivery window — we will tell you what is realistic before you commit.