Custom Zipper in Stainless Steel with Die-Casting for Bridal and Eveningwear Studios

Custom Zipper — Stainless Steel with Die-Casting

We supply zipper to garment factories and brands, built in Stainless Steel with die-casting for bridal and eveningwear studios. On a trim like this the specification that decides the outcome is slider smoothness across the full length, tested by hand on bulk, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 5000 pieces per style per finish.

The failures here are predictable: inconsistent sizing between production runs, or shade variation within one carton. We lock material, finish, dimension and tolerance before bulk, and prepare GSO conformity with Arabic labelling so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Epoxy Dome — available on Stainless Steel, quoted per position and per colour.
• Hard Enamel Fill — available on Stainless Steel, quoted per position and per colour.
• Digital Printing — available on Stainless Steel, quoted per position and per colour.
• Offset Printing — available on Stainless Steel, quoted per position and per colour.
• Heat Transfer Printing — available on Stainless Steel, quoted per position and per colour.
• Die-Casting — available on Stainless Steel, quoted per position and per colour.
• Nickel Plating — available on Stainless Steel, quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed gauge
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with die-casting applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Jebel Ali with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same slider smoothness across the full length.

FAQ

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Start your zipper programme

If you already have a supplier, send us the last problem you had with them. That is usually where we start.