Custom Hook and Eye in Polyethylene (PE) with Antique Brass Plating for E-commerce and Small-Batch Brands

Custom Hook and Eye — Polyethylene (PE) with Antique Brass Plating

We supply hook and eye to garment factories and brands, built in Polyethylene (PE) with antique brass plating for e-commerce and small-batch brands. On a trim like this the specification that decides the outcome is profile height, which decides whether it prints through the cloth, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 2000 pieces per style per finish.

The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or colour drift between the approved sample and the bulk trim. We lock material, finish, dimension and tolerance before bulk, and prepare CPSIA and California Prop 65 compliance so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Brushed Finish — available on Polyethylene (PE), quoted per position and per colour.
• Nickel Plating — available on Polyethylene (PE), quoted per position and per colour.
• Die-Casting — available on Polyethylene (PE), quoted per position and per colour.
• Mirror Polish — available on Polyethylene (PE), quoted per position and per colour.
• Epoxy Dome — available on Polyethylene (PE), quoted per position and per colour.
• Soft Enamel Fill — available on Polyethylene (PE), quoted per position and per colour.
• Ultrasonic Welding — available on Polyethylene (PE), quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed size
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with antique brass plating applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for azo dye-free declaration are prepared for the destination market. We ship to Los Angeles or New York with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same profile height.

FAQ

Which compliance documents do you provide?

We prepare azo dye-free declaration and the supporting test reports for the destination market.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Can you do small runs across many designs?

Yes — many studio and boutique programmes run small quantities across a wide design set.

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

Start your hook and eye programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.