Custom Hook and Eye — Polyethylene (PE) with Rose Gold Plating
We supply hook and eye to garment factories and brands, built in Polyethylene (PE) with rose gold plating for denim and workwear programmes. On a trim like this the specification that decides the outcome is profile height, which decides whether it prints through the cloth, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 5000 pieces per style per finish.
The failures here are predictable: minimum order quantities far above what a growing brand can absorb, or packing that arrives mixed and unusable on the line. We lock material, finish, dimension and tolerance before bulk, and prepare SNI or SIRIM documentation per destination so the shipment clears instead of sitting at port while your selling season passes.
Specification
| Product | Hook and Eye |
|---|---|
| Size | No. 5 |
| Type | hook and bar |
| Base material | Polyethylene (PE) |
| Finish / process | Rose Gold Plating |
| Colour options | 24 Pantone-matched shades |
| Packing | reel packed |
| MOQ | 5000 pieces per style per finish |
| Sampling | 10 working days, 3 days per revision |
| Bulk lead time | 25-50 days after approval |
| Compliance | SNI or SIRIM documentation per destination; CPSIA lead and phthalate testing |
| Ship to | Jakarta or Port Klang (Asia-Pacific) |
What buyers can customise
- Hard Enamel Fill — available on Polyethylene (PE), quoted per position and per colour.
- Powder Coating — available on Polyethylene (PE), quoted per position and per colour.
- Anti-Rust Treatment — available on Polyethylene (PE), quoted per position and per colour.
- Rubber Coating — available on Polyethylene (PE), quoted per position and per colour.
- Paint Spray — available on Polyethylene (PE), quoted per position and per colour.
- Gunmetal Plating — available on Polyethylene (PE), quoted per position and per colour.
- Antique Brass Plating — available on Polyethylene (PE), quoted per position and per colour.
How we produce it
- Drawing or reference sample review, with size and finish confirmed
- Material selection and a finish sample or strike-off
- Prototype made to the agreed size
- Fit and wash test on the actual garment fabric, then a pre-production sample
- Bulk run with rose gold plating applied under controlled settings
- In-line inspection, final AQL 2.5 inspection and packing to your ratio
Where it is used
- Denim and workwear — hard-wearing finishes that survive industrial washing
- Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
- Childrenswear and schoolwear — tested to the destination's safety standard
- Bridal and eveningwear — small runs with hand-finished detail
- Uniform and corporate programmes — repeatable spec held on file for reorders
Packing, testing and delivery
Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for CPSIA lead and phthalate testing are prepared for the destination market. We ship to Jakarta or Port Klang with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same profile height.
FAQ
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
How long does sampling take?
A first sample takes 10 working days, and each revision about 3 days.
What is the minimum order?
Programmes start at 5000 pieces per style per finish. Mixed sizes are fine within one style.
How do you control colour on reorders?
The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.
Start your hook and eye programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
