Custom Hook and Eye in Polypropylene (PP) with Rose Gold Plating for Childrenswear and Schoolwear

Custom Hook and Eye — Polypropylene (PP) with Rose Gold Plating

We supply hook and eye to garment factories and brands, built in Polypropylene (PP) with rose gold plating for bridal and eveningwear studios. On a trim like this the specification that decides the outcome is closing force, so the hook holds under strain without opening, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 500 pieces per style per finish.

The failures here are predictable: a supplier who disappears once the deposit is paid, or unclear responsibility when a defect shows up after washing. We lock material, finish, dimension and tolerance before bulk, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Nickel Plating — available on Polypropylene (PP), quoted per position and per colour.
• Black Oxide — available on Polypropylene (PP), quoted per position and per colour.
• UV Printing — available on Polypropylene (PP), quoted per position and per colour.
• Hard Enamel Fill — available on Polypropylene (PP), quoted per position and per colour.
• Mirror Polish — available on Polypropylene (PP), quoted per position and per colour.
• Brushed Finish — available on Polypropylene (PP), quoted per position and per colour.
• Epoxy Dome — available on Polypropylene (PP), quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed size
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with rose gold plating applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for REACH nickel-release test for metal findings are prepared for the destination market. We ship to Shanghai or Shenzhen with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same closing force.

FAQ

Which compliance documents do you provide?

We prepare REACH nickel-release test for metal findings and the supporting test reports for the destination market.

How long does sampling take?

A first sample takes 10 working days, and each revision about 3 days.

What packing options are available?

Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Start your hook and eye programme

Tell us the quantity, the target price and the delivery window — we will tell you what is realistic before you commit.