Custom Hook and Eye in Nylon (PA) with Hard Enamel Fill for E-commerce and Small-Batch Brands

Custom Hook and Eye — Nylon (PA) with Hard Enamel Fill

We supply hook and eye to garment factories and brands, built in Nylon (PA) with hard enamel fill for uniform and corporate programmes. On a trim like this the specification that decides the outcome is closing force, so the hook holds under strain without opening, so that is agreed in writing before bulk — not discovered when the first carton is opened on the line. Programmes start at 3000 pieces per style per finish.

The failures here are predictable: a finish that tarnishes or rubs off after washing, or colour drift between the approved sample and the bulk trim. We lock material, finish, dimension and tolerance before bulk, and prepare CPSIA and California Prop 65 compliance so the shipment clears instead of sitting at port while your selling season passes.

Specification

What buyers can customise

• Rose Gold Plating — available on Nylon (PA), quoted per position and per colour.
• Gunmetal Plating — available on Nylon (PA), quoted per position and per colour.
• Powder Coating — available on Nylon (PA), quoted per position and per colour.
• Antique Brass Plating — available on Nylon (PA), quoted per position and per colour.
• Chrome Plating — available on Nylon (PA), quoted per position and per colour.
• Soft Enamel Fill — available on Nylon (PA), quoted per position and per colour.
• Paint Spray — available on Nylon (PA), quoted per position and per colour.

How we produce it

1. Drawing or reference sample review, with size and finish confirmed
2. Material selection and a finish sample or strike-off
3. Prototype made to the agreed size
4. Fit and wash test on the actual garment fabric, then a pre-production sample
5. Bulk run with hard enamel fill applied under controlled settings
6. In-line inspection, final AQL 2.5 inspection and packing to your ratio

Where it is used

• Denim and workwear — hard-wearing finishes that survive industrial washing
• Outerwear and tailoring — matched to the shell fabric so it drapes with the garment
• Childrenswear and schoolwear — tested to the destination's safety standard
• Bridal and eveningwear — small runs with hand-finished detail
• Uniform and corporate programmes — repeatable spec held on file for reorders

Packing, testing and delivery

Trims are packed to the ratio you specify — by size, by colour or by garment set — with barcodes applied where the line needs them. Test reports for CPSIA lead and phthalate testing are prepared for the destination market. We ship to Los Angeles or New York with the commercial invoice, packing list and certificate of origin, and hold the approved reference so reorders reproduce the same material, the same finish and the same closing force.

FAQ

Do you ship to our forwarder?

Yes. We deliver to your nominated forwarder or quote landed cost under the agreed Incoterm.

How do you control colour on reorders?

The approved reference and the bulk standard are retained, and every reorder is checked against them before shipment.

Which compliance documents do you provide?

We prepare CPSIA lead and phthalate testing and the supporting test reports for the destination market.

Can you match a reference sample?

Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.

Start your hook and eye programme

Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.