Custom Belt — Horn with Paint Spray
We supply belt to brands, retailers and uniform programmes, made in Horn with paint spray for childrenswear and schoolwear. On a piece like this the specification that decides whether it sells or comes back is buckle pull strength, tested against the strap it is paired with — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 2000 pieces per style.
The failures here are predictable: colour drift between the approved sample and the bulk trim, or inconsistent sizing between production runs. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare CPSIA and California Prop 65 compliance so the container clears instead of missing the season it was bought for.
Specification
| Product | Belt |
|---|---|
| Width | 30 mm |
| Type | leather belt |
| Material | Horn |
| Construction / finish | Paint Spray |
| Colour options | 16 shades, Pantone matched |
| Packing | hangtag packed |
| MOQ | 2000 pieces per style |
| Sampling | 14 working days, 3 days per revision |
| Bulk lead time | 15-30 days after approval |
| Compliance | CPSIA and California Prop 65 compliance; salt spray test for metal finishes |
| Ship to | Los Angeles or New York (North America) |
What buyers can customise
- Anti-Rust Treatment — available on Horn, quoted per position and per colour.
- Soft Enamel Fill — available on Horn, quoted per position and per colour.
- Rubber Coating — available on Horn, quoted per position and per colour.
- Ultrasonic Welding — available on Horn, quoted per position and per colour.
- Binding Tape Edge — available on Horn, quoted per position and per colour.
- UV Printing — available on Horn, quoted per position and per colour.
- Hard Enamel Fill — available on Horn, quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Horn
- Construction sample with paint spray applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for salt spray test for metal finishes are prepared for the destination market. We ship to Los Angeles or New York with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same buckle pull strength.
FAQ
What packing options are available?
Bulk packed, carded, or packed to your own size and design ratio with barcodes applied.
Which compliance documents do you provide?
We prepare salt spray test for metal finishes and the supporting test reports for the destination market.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Can you do small runs across many designs?
Yes — many studio and boutique programmes run small quantities across a wide design set.
Start your belt programme
Send us a reference sample, a drawing or a spec sheet and we will come back with material options, a costing and a sampling timetable.
