Custom Earmuffs & Eye Mask — Polyethylene (PE) with Laser Cutting
We supply earmuffs & eye mask to brands, retailers and uniform programmes, made in Polyethylene (PE) with laser cutting for bridal and eveningwear studios. On a piece like this the specification that decides whether it sells or comes back is skin-contact fabric that washes without pilling — so that is agreed in writing before bulk, not discovered after the shipment lands. Programmes start at 300 pieces per style.
The failures here are predictable: a finish that tarnishes or rubs off after washing, or unclear responsibility when a defect shows up after washing. We lock material, construction, measurement and tolerance on a pre-production sample, and prepare GB 18401 safety classification with GB/T 29862 fibre labelling so the container clears instead of missing the season it was bought for.
Specification
| Product | Earmuffs & Eye Mask |
|---|---|
| Size | wide-fit |
| Type | heated eye mask |
| Material | Polyethylene (PE) |
| Construction / finish | Laser Cutting |
| Colour options | 12 shades, Pantone matched |
| Packing | assorted size pack |
| MOQ | 300 pieces per style |
| Sampling | 12 working days, 5 days per revision |
| Bulk lead time | 25-55 days after approval |
| Compliance | GB 18401 safety classification with GB/T 29862 fibre labelling; GRS recycled content claim |
| Ship to | Shanghai or Shenzhen (Mainland China) |
What buyers can customise
- Die-Casting — available on Polyethylene (PE), quoted per position and per colour.
- Mercerised Finish — available on Polyethylene (PE), quoted per position and per colour.
- Warp Knitting — available on Polyethylene (PE), quoted per position and per colour.
- Yarn Dyeing — available on Polyethylene (PE), quoted per position and per colour.
- Water-Repellent Finish — available on Polyethylene (PE), quoted per position and per colour.
- Epoxy Dome — available on Polyethylene (PE), quoted per position and per colour.
- Embossed Grain — available on Polyethylene (PE), quoted per position and per colour.
How we produce it
- Specification review — measurement, material and target price
- Material sourcing and a finished sample in the agreed Polyethylene (PE)
- Construction sample with laser cutting applied
- Wear and wash test on the actual production fabric, then pre-production sample
- Bulk production with in-line inspection at cutting, making and finishing
- Final AQL 2.5 inspection and packing to your ratio
Where it sells
- Retail chains and department stores — repeatable spec, stable reorders
- E-commerce and small-batch brands — low minimums across many designs
- Uniform and corporate programmes — held spec for years of repeat orders
- Promotional and gifting channels — logo application and retail packing
- Cold-weather and travel programmes — packed to the season's delivery window
Packing, testing and delivery
Pieces are packed to the ratio you specify — by size, by colour or by style set — with barcodes applied where the channel needs them. Test reports for GRS recycled content claim are prepared for the destination market. We ship to Shanghai or Shenzhen with invoice, packing list and certificate of origin, and keep the approved reference on file so reorders reproduce the same material, the same construction and the same skin-contact fabric that washes without pilling.
FAQ
What is the minimum order?
Programmes start at 300 pieces per style per finish. Mixed sizes are fine within one style.
How long does sampling take?
A first sample takes 12 working days, and each revision about 5 days.
Can you match a reference sample?
Yes. Send the trim and we match material, finish and shade, then confirm on a pre-production sample before bulk.
Which compliance documents do you provide?
We prepare GRS recycled content claim and the supporting test reports for the destination market.
Start your earmuffs & eye mask programme
If you already have a supplier, send us the last problem you had with them. That is usually where we start.
